Operating ManualPrecision Water Flow MeterPrecision Water Flow ControllerL-SeriesLC-SeriesLCR-SeriesThe Fastest Flow Controller Company in the World!
10PRESSURE
11BLEED PORTS
12POWER AND SIGNAL CONNECTIONS
13INPUT SIGNALSAnalog Input SignalApply analog input to Pin 4 as shown on page 12.
14
OUTPUT SIGNALS
16CAUTION
17
18MENUCCM+0.0CCMTOTAL/TIMERTotalizerBACK RESET0000:00:00000.00#C+21.50+0.00 CCM MENUTARE V PSIA+13.60CCM+0.00The Main display shows,
MAIN This as the primary displayed parameter. The following parameters are displayed in Line Press
06/04/2014 Rev.30 DOC-LLCMAN16RECALIBRATIONYour Alicat instrument is a precision device and Alicat strongly recommends that you send it to
20SELECT MENUmanufacturer’s data.
21COMMUNICATION SELECTAccess by pressing or COMM on the Select Menu display. Unit ID
22MISCELLANEOUS Miscellaneous is accessed by pressing the MISCNext select either MISC1 or MISC1
23DIAGTESTBACK MAINBACK MAINSCROLLR8: AP Sig 7871R9: Temp Sig 39071R10: DP Side 9986R11: DP Brdg
24MANUFACTURER DATAManufacturer Data is accessed by pressing the MFG DATAdisplay. shows the name and tele
The Main display shows, temperature also be displayed if the meter was order
26MAIN This as the primary displayed parameter. The following parameters are displayed in Line Pres
27CONTROLSETUPRS232 COMMMFGDATAMAINMISCGASSELECTSELECT MENU
28CONTROL SETUP Control Setup
CAUTION!
3Notes for Using Alicat Water Flow Devices ► USE ONLY PURE, CLEAN DI OR DISTILLED WATER IN THIS DEVICE. ► DO NOT use tap water or water with any biol
30PID TUNING
31PD
321.
33
34(LC and LCR-Series only):
Changing From Streaming to Polling Mode: RS-485 units do not have a streaming mode
36
37Data Format:
38
14. The “Line Delay” box is defaulted to 0 milliseconds. This is where you will
4 page 19
40TROUBLESHOOTING
41
42
43
44BATCH PROCESSING MODE – CONTROLLERS ONLY
Alicat Portable Meters and Gauges
46temperatures outside the standard Alicat
47The
48
AccessoriesPart Number
Technical Data for Alicat L - Series Water Flow Meters0 – 0.5 ccm Full Scale through 0 – 10 lpm Full ScaleAlicat L-Series water ow meters read both
L-Series:0 - 2 lpm
Technical Data for Alicat LC & LCR Water Flow Controllers0 – 5 ccm Full Scale through 0 – 5 lpm Full ScaleAlicat LC and LCR-Series water ow co
LC-Series:0 - 5 ccm0 - 10 ccm
SpecicationMeter or GaugeSmall ValveControllerLarge ValveControllerDescriptionInput /Output Signal Digital PROFIBUS DPElectrical Connections DB9Su
Eight Pin Mini-DIN Connector Pin-OutsIf your Alicat Instrument was ordered with the standard Eight Pin Mini-DIN connection, please be sure to refere
520-290-6060 Ph. 520-290-0109 Fax
Pin 1 23
6TABLE OF CONTENTS Page 8 10 11 12
60
61
62
63
64
DB15 – Pin-Out Alicat StylePin Number Function1 Ground2 Primary Analog Signal Output3 Ground4 N/C5 Power Supply (+Vdc)6 N/C7 N/C8 Analog Tare (meter
66Pin Number Function1 Ground2 Primary Analog Signal Output3Analog Tare (meters — when grounded)*Analog Set-Point Input (controllers)*4 Ground5 Power
67DB15B – Pin-Out “Brooks” StylePin Number Function1 Ground2 Primary Analog Signal Output3 N/C4 N/C5 Power Supply (+Vdc)6 N/C7 N/C8Analog Tare (meters
68DB15K – Pin-Out “MKS” StyleThe following pin-out chart describes the safest and generally compatible arrangement when connecting a non-Alicat DB15
DB15H – Pin-Out “Hastings H” StylePin Number Function1 N/C2 RS-232 RX (receive) or RS-485 – *3 N/C4 N/C5 Ground6 Primary Analog Signal Output7 Power
7TABLE OF CONTENTS Page 32 32 32
70DB15S – Pin-Out “Sierra” StylePin Number Function1 Ground2 Primary Analog Signal Output 3 N/C4 N/C5 Ground6 N/C7 N/C8Analog Tare (meters — when grou
Serial Number: ______________________Model Number: _________________________Notice: Alicat Scientic, Inc. reserves the right to make any changes and
#GasAbsoluteViscosity*25°C Density **25°C14.696 psiaCompressibility 25°C14.696 psia0 Air Air 184.918 1.1840 0.99971 Argon Ar 225.593 1.6339 0.99
8GETTING STARTEDPower JackL Water Flow Meter
MOUNTING
Comments to this Manuals